Flashing Samsung Galaxy Gio Using ODIN

Flashing refers to the overwriting of existing data on ROM modules present in a electronic device with new data. This can be done to upgrade a device or to change the provider of a service associated with the function of the device, such as changing from one mobile phone service provider to another or installing a new operating system.
Keep in your mind (important): Always  make your device to a factory setting(reset) in order flashing activity. it is intended to avoid glitches and distractions.
Ok, let's assume that you have done above important step, then here we go:

1. Extract and Run Samsung S5660 Galaxy Gio ODIN 4.42 Downloader on your Desktop.
2. Open ODIN and Click OPS button and select and load: Gio_v1.0.ops (If you want to flash single file(.tar) click on Single package and locate the single .tar file in single package option . skip to step 7)
3. Click BOOT button and select and load: APBOOT_S5660xxxxx_CL940762_REV03_user_low_true.tar.md5
4. Click PDA button and select and load: CODE_S5660xxxxx_CL940762_REV03_user_low_true.tar.md5
5. Click PHONE button and select: MODEM_S5660xxxxx_CL928654_REV03.tar.md5
6. Click CSC button and select: GT-S5660-MULTI-CSC-Oxxxxx.tar.md5
7.  Turn the Samsung Galaxy Gio into Download mode by pressing ( Volume Down + OK + Power ) together.
8. Connect Cable phone to pc Make sure that the program detect the phone.
9. Click Start button if all set and ready,and wait until the program will finished downloading files. A word PASS! will appear if the flashing successfully completes.

If you follow the step by step carefully, your  phone will then reboot, and you can check and then approve the newly downloaded firmware version by typing *#1234# and then do a full reset by typing this Code *2767*3855#

Download ODIN
[youtube 3x5EJKY64Vg]